No more sediment or overflow! 🙌

With the Torpedo Buoy™ floating dip tube, you'll be pouring the clearest beer possible from first pint to last! As your beer sits at low temperatures, more and more haze particles settle out to the bottom of the keg. This means the clearest beer in the keg is always at the top. The Buoy™ uses a stainless float to position the silicone dip tube just 1 inch below the surface of the beer. Kick homebrew haze to the curb and start drawing the brightest beer possible. Yeah, Buoy! 

Installs on any Ball Lock or Pin Lock keg quickly and easily. Simply remove your bev out post and replace the long metal dip tube with the provided 3" metal dip tube. Slide one end of the silicone tubing over the 3" dip tube and the other end of the tubing over the metal tube connected to the float. The silicone tubing is sized for 5-gallon kegs, but you can cut it shorter to use on 1.5 or 2.5-gallon kegs. Also compatible with the Torpedo Keg Depth Charge series 10 & 15 gallon kegs! 


  • 3" Stainless Dip Tube    
  • 1/4" ID Silicone Tubing (23.5" long)    
  • Ball Float Made from 304 Stainless Steel

Torpedo Keg Buoy Floating Dip Tube - $17.99

Simply attach the Flow Stopper to the gas post of your keg, then when the keg is full it will automatically cut off flow and prevent excess beer from exiting your gas post and spilling onto the floor.

Previous article Maintain Consistent Fermentation Temperature in the Cold
Next article Stainless Conical Fermenter @ $99!?! 🤯

Leave a comment

Comments must be approved before appearing

* Required fields