Menu
Qualifying purchases $150.00 or more will receive a free electronic gift card. The gift card will be emailed separately and can be applied to a future purchase. Gift cards are sent via email after qualifing purchase is made. Valid for one year from the issued date. Order total refers to the pre-tax, pre-shipping charge sub total. Gift cards can not be applied to a previous order. Valid on new purchases only.

Neoprene Sleeve - 3 Gallon Fermenter

$19.99 Cyber week Sale & FREE Shipping over $49. Details
$24.95 Save $4.96 (19%)
List Price: $24.95
You save: $4.96 (19%)
Save an extra 20% off! USE CODE: BD20

In Stock.
  • Designed for the BrewDemon 3 Gal. Conical Fermenter.
  • Maintain a consistent temperature during those cold winter months and hot summer days.
  • Four pockets to add reusable heating or cooling pads.
$19.99
& FREE Shipping over $49. Easy Returns.
No sales tax. (unless shipping to TX)

Most items can be returned within 30 days of receipt for a refund. Shipping charges are non-refundable.

Read more | Live chat

  • Designed for the BrewDemon 3 Gal. Conical Fermenter.
  • Maintain a consistent temperature during those cold winter months and hot summer days.
  • Four pockets to add reusable heating or cooling pads.

Backed by a 1 year
Keg Factory Guarantee

Details »
This neoprene sleeve allows you to better regulate the temperature of your wort, no matter the temperature inside the house. Alone the sleeve will help keep your wort warmer during those winter months and if that is not enough, there are four pockets to place microwavable heating packs. And in the summer the neoprene sleeve helps keep the cooler wort in and allow you to place up to 4 ice packs on your fermenter at all times.

1-GALLON BREWING INSTRUCTIONS

1. Sanitize Your Equipment

This is the most important step in the brewing process. It kills any bacteria, wild yeast and mold that can cause off-flavors in your beer. It’s important to sanitize everything that comes in contact with your beer. This step should take about 15 minutes.

  • 1. In a container, dissolve half (1 tbsp) of the One Step No-Rinse Cleanser into a gallon of warm water. Shake until the cleanser has completely dissolved. Note: Save the remaining One Step for bottling.
  • 2. Pour solution into the fermenter, place on lid and insert your venting plug. While holding down the lid, cover the vent plug with your hand and swirl solution around making sure it contacts the entire inside surface including the lid. Do this step over the sink
  • 3. Open and close the tap several times to sanitize its inner surface.
  • 4. Place your mixing spoon(s), measuring cup, can opener inside the fermenter. Careful not to scratch the inside surface. Allow it to soak a minimum of 10 minutes.
  • 5. Remove utensils and place them on a clean paper towel or a sanitized plate or bowl. Drain fermenter (no rinsing required). Note: Solution is reusable, you can use it again to sanitize a blender or any other utensil used during the brewing process.
*If needed. Can opener must be sanitized before using.
 
 
2. Making This Beer

The included recipe is ready for fermentation, just add water and yeast (under the black lid of the extract). Since beer is mostly water, the better the water the better your beer. This step should take about 30 minutes.

    • 1. Remove yeast packet from under the lid and stand can in a tub of hot tap water. This will help it pour more easily.
    • 2. Add cold water to the start level on the side of the fermenter. For best results, use bottled spring water or charcoal-filtered tap water.
    • 3. Place 2 cups of water into a clean 3-quart pot and bring to a boil.
    • 4. Remove from heat. Then slowly stir in the contents from can until it has fully dissolved. This mixture is called the wort.
    • 5. Pour this wort into the fermenter. Bring the volume of the fermenter up to the fill level by adding more water. Mix thoroughly. Make sure the wort is between 64°- 82° F before going to the next step.
    • 6. Add yeast, then place on your lid with vent plug.
    • 7. Place the fermenter out of direct sunlight and maintain a temperature between 64°- 82° F for approximately 7 days.
     
    And Now You Wait

    After 7 days the beer in your fermenter should have stopped fermenting and begun to clear. It’s now time to bottle! If you’re not sure, draw a small amount from the tap; if it tastes like flat beer, it’s ready to bottle. If it tastes sweet, give it a few more days.

     
     
    3. Carbonating Your Beer

    Since nobody likes flat beer we need to add carbonation. It is normal for this process to create a small amount of yeast sediment at the bottom of each bottle. This step should take about 25 minutes.

    • 1. Dissolve the remaining One Step into a gallon of warm water.
    • 2. Fill each bottle with this solution and shake a few times making sure the solution contacts the entire inside surface. Now wait 10 minutes (minimum).
    • 3. Place the caps in a bowl filled with sanitizing solution. Now wait 10 minutes (minimum).
    • 4. Empty bottles (no rinsing required) and place caps on a paper towel.
    • 5. Add white granulated sugar to each bottle. Note: Using the chart above choose the correct priming sugar amount for your bottles.
    • 6. Using the tap, fill each bottle halfway up the base of the neck. Make sure all bottles contain approximately the same amount of beer.
    • 7. Cap each bottle and invert them several times until the sugar has been completely dissolved. Do not shake bottles.
    • 8. Place the bottles upright and out of direct sunlight. Maintain a temperature between 64°- 82° F for approximately 7 days.
     
    EVERY COUPLE OF DAYS GIVE EACH BOTTLE A SQUEEZE. WHEN THEY BECOME FIRM TO THE TOUCH (LIKE A NEW 2-LITER BOTTLE OF SODA) AND THE BEER HAS CLEARED, THEY’RE READY FOR THE FRIDGE.
     
    4. Enjoying Your Beer!

    After your beer has carbonated, it’s ready to drink! However, you can improve the flavor by bottle conditioning your beer. This can be done a couple ways:

    • Warm conditioning: Keep your bottles in a dark, dry location away from sunlight and maintain a temperature between 50°- 70° F for several weeks to a month.
    • Cold conditioning: Place your bottles in the refrigerator for several weeks to a month. 
     
    WHETHER OR NOT YOU CHOOSE TO BOTTLE CONDITION YOUR BEER, IT WILL ALWAYS TASTE BETTER AFTER CHILLING IN THE REFRIGERATOR FOR AT LEAST 24 HOURS. THEN IT’S TIME TO CALL YOUR FRIENDS!

    FREE Shipping over $49

    Flat Rate $7.95 under $49

    Shipping

    • FREE Shipping on all orders over $49 shipping within the contiguous U.S.
    • Most in-stock orders ship the following business day.
    • Standard ground shipping typically takes 1-3 business days in transit
      • please note: we are experiencing delays in some fulfillment centers due to COVID-19 and wildfires. 

      FedEx / UPS / USPS Shipping:

      • FREE over $49*
      • Flat rate $7.95 under $99
      • 1-3 business days in transit
      • Does not require Signature

      Returns

        We're committed to your total satisfaction. You may return your items within 30 days of their delivery. Please follow the instructions below.  

          Return Eligibility:     

          • Returns must be in brand new condition.     
          • Items must be returned in their original packaging.     
          • Items must include all parts, pieces, and manuals.     
          • Items cannot be assembled or used in anyway. 

          Restocking fees are typically not applied, however, in some cases a restocking fee not to exceed 30% will be withheld from your returned merchandise total.  Shipping costs are non-refundable.

          If you have any further questions, please do not hesitate to contact us!

           

          * Free Shipping only applies to orders over $49.00, shipping within the contiguous United States.

          More Items to Consider

          Product Overview

          This neoprene sleeve allows you to better regulate the temperature of your wort, no matter the temperature inside the house. Alone the sleeve will help keep your wort warmer during those winter months and if that is not enough, there are four pockets to place microwavable heating packs. And in the summer the neoprene sleeve helps keep the cooler wort in and allow you to place up to 4 ice packs on your fermenter at all times.

          1-GALLON BREWING INSTRUCTIONS

          1. Sanitize Your Equipment

          This is the most important step in the brewing process. It kills any bacteria, wild yeast and mold that can cause off-flavors in your beer. It’s important to sanitize everything that comes in contact with your beer. This step should take about 15 minutes.

          • 1. In a container, dissolve half (1 tbsp) of the One Step No-Rinse Cleanser into a gallon of warm water. Shake until the cleanser has completely dissolved. Note: Save the remaining One Step for bottling.
          • 2. Pour solution into the fermenter, place on lid and insert your venting plug. While holding down the lid, cover the vent plug with your hand and swirl solution around making sure it contacts the entire inside surface including the lid. Do this step over the sink
          • 3. Open and close the tap several times to sanitize its inner surface.
          • 4. Place your mixing spoon(s), measuring cup, can opener inside the fermenter. Careful not to scratch the inside surface. Allow it to soak a minimum of 10 minutes.
          • 5. Remove utensils and place them on a clean paper towel or a sanitized plate or bowl. Drain fermenter (no rinsing required). Note: Solution is reusable, you can use it again to sanitize a blender or any other utensil used during the brewing process.
          *If needed. Can opener must be sanitized before using.
           
           
          2. Making This Beer

          The included recipe is ready for fermentation, just add water and yeast (under the black lid of the extract). Since beer is mostly water, the better the water the better your beer. This step should take about 30 minutes.

            • 1. Remove yeast packet from under the lid and stand can in a tub of hot tap water. This will help it pour more easily.
            • 2. Add cold water to the start level on the side of the fermenter. For best results, use bottled spring water or charcoal-filtered tap water.
            • 3. Place 2 cups of water into a clean 3-quart pot and bring to a boil.
            • 4. Remove from heat. Then slowly stir in the contents from can until it has fully dissolved. This mixture is called the wort.
            • 5. Pour this wort into the fermenter. Bring the volume of the fermenter up to the fill level by adding more water. Mix thoroughly. Make sure the wort is between 64°- 82° F before going to the next step.
            • 6. Add yeast, then place on your lid with vent plug.
            • 7. Place the fermenter out of direct sunlight and maintain a temperature between 64°- 82° F for approximately 7 days.
             
            And Now You Wait

            After 7 days the beer in your fermenter should have stopped fermenting and begun to clear. It’s now time to bottle! If you’re not sure, draw a small amount from the tap; if it tastes like flat beer, it’s ready to bottle. If it tastes sweet, give it a few more days.

             
             
            3. Carbonating Your Beer

            Since nobody likes flat beer we need to add carbonation. It is normal for this process to create a small amount of yeast sediment at the bottom of each bottle. This step should take about 25 minutes.

            • 1. Dissolve the remaining One Step into a gallon of warm water.
            • 2. Fill each bottle with this solution and shake a few times making sure the solution contacts the entire inside surface. Now wait 10 minutes (minimum).
            • 3. Place the caps in a bowl filled with sanitizing solution. Now wait 10 minutes (minimum).
            • 4. Empty bottles (no rinsing required) and place caps on a paper towel.
            • 5. Add white granulated sugar to each bottle. Note: Using the chart above choose the correct priming sugar amount for your bottles.
            • 6. Using the tap, fill each bottle halfway up the base of the neck. Make sure all bottles contain approximately the same amount of beer.
            • 7. Cap each bottle and invert them several times until the sugar has been completely dissolved. Do not shake bottles.
            • 8. Place the bottles upright and out of direct sunlight. Maintain a temperature between 64°- 82° F for approximately 7 days.
             
            EVERY COUPLE OF DAYS GIVE EACH BOTTLE A SQUEEZE. WHEN THEY BECOME FIRM TO THE TOUCH (LIKE A NEW 2-LITER BOTTLE OF SODA) AND THE BEER HAS CLEARED, THEY’RE READY FOR THE FRIDGE.
             
            4. Enjoying Your Beer!

            After your beer has carbonated, it’s ready to drink! However, you can improve the flavor by bottle conditioning your beer. This can be done a couple ways:

            • Warm conditioning: Keep your bottles in a dark, dry location away from sunlight and maintain a temperature between 50°- 70° F for several weeks to a month.
            • Cold conditioning: Place your bottles in the refrigerator for several weeks to a month. 
             
            WHETHER OR NOT YOU CHOOSE TO BOTTLE CONDITION YOUR BEER, IT WILL ALWAYS TASTE BETTER AFTER CHILLING IN THE REFRIGERATOR FOR AT LEAST 24 HOURS. THEN IT’S TIME TO CALL YOUR FRIENDS!

            FREE Shipping over $49

            Flat Rate $7.95 under $49

            Shipping

            • FREE Shipping on all orders over $49 shipping within the contiguous U.S.
            • Most in-stock orders ship the following business day.
            • Standard ground shipping typically takes 1-3 business days in transit
              • please note: we are experiencing delays in some fulfillment centers due to COVID-19 and wildfires. 

              FedEx / UPS / USPS Shipping:

              • FREE over $49*
              • Flat rate $7.95 under $99
              • 1-3 business days in transit
              • Does not require Signature

              Returns

                We're committed to your total satisfaction. You may return your items within 30 days of their delivery. Please follow the instructions below.  

                  Return Eligibility:     

                  • Returns must be in brand new condition.     
                  • Items must be returned in their original packaging.     
                  • Items must include all parts, pieces, and manuals.     
                  • Items cannot be assembled or used in anyway. 

                  Restocking fees are typically not applied, however, in some cases a restocking fee not to exceed 30% will be withheld from your returned merchandise total.  Shipping costs are non-refundable.

                  If you have any further questions, please do not hesitate to contact us!

                   

                  * Free Shipping only applies to orders over $49.00, shipping within the contiguous United States.


                  Can't find your part?

                  We can source it for you!

                  We strive to stock it all, however, if you can't find the part(s) you need on our site, let us know, and we will source it for you to be delivered in under a week in most cases.

                  Submit your request here

                  support@kegfactory.com

                  You recently viewed

                  Clear recently viewed