Menu

Oxygenation Kit - Partial System

$54.99 & FREE Shipping. Details
$64.99 Save $10.00 (15%)
List Price: $64.99
You save: $10.00 (15%)

In Stock.
$54.99
& FREE Shipping.
No sales tax. (unless shipping to TX)


Returns are easy, just ask Most items can be returned within 30 days of receipt for a refund. Shipping charges are non-refundable.

Read more | Live chat

This Oxygenation System pumps pure oxygen into your cooled wort using a disposable oxygen tank and stainless steel diffusion stone. Takes a mere 1-2 minutes of operation to achieve adequate oxygen levels. Comes with a regulator for disposable oxygen tank, sterile inline filter, our threaded .5 micron stainless steel oxygenation stone and tubing.

Yeast need oxygen to make good beer. The problem is that after boiling for an hour the wort is void of oxygen. Fermentations with low levels of oxygen will produce yeast that start slower, have sluggish ferments, and are more likely to poop-out and stop fermenting. On the contrary, fermentations that have been infused with oxygen will have healthier yeast that start faster, ferment faster, have a greater tolerance to alcohol, produce beers with less residual sugar, and produce better overall flavors.

Currently, the standard practice of getting oxygen to the yeast is to splash the wort as it enters the fermenter or to shake the fermenter once full. This practice is definitely better than nothing, however it is impossible to infuse enough oxygen by shaking or splashing and the air you do infuse is usually contaminated to some extent.

Please Note: Disposable Oxygen tank is Not Included. These are available at some hardware stores. Each disposable oxygen tank will last for approximately 10-15 five gallon batches.

About the inline filters: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't dunk it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag.

Oxygen Regulator Features:

  • 1/4" Barb Output
  • Max Delivery Pressure: 100 PSI
  • Max Flow Rate: 180 CFH
  • Regulator is Left Hand Thread
  • Stainless Steel Actuating Rod
  • Machined brass body with adjusting cap, piston and hose connection

FREE Shipping over $49

Flat Rate $7.95 under $49

Shipping

  • FREE Shipping on all orders over $49 shipping within the contiguous U.S.
  • Most in-stock orders ship the following business day.
  • Standard ground shipping typically takes 1-3 business days in transit

      FedEx / UPS / USPS Shipping:

      • FREE over $49*
      • Flat rate $7.95 under $99
      • 1-3 business days in transit
      • Does not require Signature

      Returns

        We're committed to your total satisfaction. You may return your items within 30 days of their delivery. Please follow the instructions below.  

          Return Eligibility:     

          • Returns must be in brand new condition.     
          • Items must be returned in their original packaging.     
          • Items must include all parts, pieces, and manuals.     
          • Items cannot be assembled or used in anyway. 

          Restocking fees are typically not applied, however, in some cases a restocking fee not to exceed 30% will be withheld from your returned merchandise total.  Shipping costs are non-refundable.

          If you have any further questions, please do not hesitate to contact us!

           

          * Free Shipping only applies to orders over $49.00, shipping within the contiguous United States.

          More Items to Consider

          Product Overview

          This Oxygenation System pumps pure oxygen into your cooled wort using a disposable oxygen tank and stainless steel diffusion stone. Takes a mere 1-2 minutes of operation to achieve adequate oxygen levels. Comes with a regulator for disposable oxygen tank, sterile inline filter, our threaded .5 micron stainless steel oxygenation stone and tubing.

          Yeast need oxygen to make good beer. The problem is that after boiling for an hour the wort is void of oxygen. Fermentations with low levels of oxygen will produce yeast that start slower, have sluggish ferments, and are more likely to poop-out and stop fermenting. On the contrary, fermentations that have been infused with oxygen will have healthier yeast that start faster, ferment faster, have a greater tolerance to alcohol, produce beers with less residual sugar, and produce better overall flavors.

          Currently, the standard practice of getting oxygen to the yeast is to splash the wort as it enters the fermenter or to shake the fermenter once full. This practice is definitely better than nothing, however it is impossible to infuse enough oxygen by shaking or splashing and the air you do infuse is usually contaminated to some extent.

          Please Note: Disposable Oxygen tank is Not Included. These are available at some hardware stores. Each disposable oxygen tank will last for approximately 10-15 five gallon batches.

          About the inline filters: There are two sides to the filter - an "in" and an "out". The direction you use doesn't matter, however, you want to take note of which way you first push air through it and always keep it that way. There is an arrow on the edge of the filter housing that we use to keep the air flow going one direction when using it. The filter should never get wet, so don't dunk it in sanitizer. If you want to clean the outside of it, use Alpet D2. To store the filter, use a little tinfoil on the "In" of the filter and store in a zip-lock bag.

          Oxygen Regulator Features:

          • 1/4" Barb Output
          • Max Delivery Pressure: 100 PSI
          • Max Flow Rate: 180 CFH
          • Regulator is Left Hand Thread
          • Stainless Steel Actuating Rod
          • Machined brass body with adjusting cap, piston and hose connection

          FREE Shipping over $49

          Flat Rate $7.95 under $49

          Shipping

          • FREE Shipping on all orders over $49 shipping within the contiguous U.S.
          • Most in-stock orders ship the following business day.
          • Standard ground shipping typically takes 1-3 business days in transit

              FedEx / UPS / USPS Shipping:

              • FREE over $49*
              • Flat rate $7.95 under $99
              • 1-3 business days in transit
              • Does not require Signature

              Returns

                We're committed to your total satisfaction. You may return your items within 30 days of their delivery. Please follow the instructions below.  

                  Return Eligibility:     

                  • Returns must be in brand new condition.     
                  • Items must be returned in their original packaging.     
                  • Items must include all parts, pieces, and manuals.     
                  • Items cannot be assembled or used in anyway. 

                  Restocking fees are typically not applied, however, in some cases a restocking fee not to exceed 30% will be withheld from your returned merchandise total.  Shipping costs are non-refundable.

                  If you have any further questions, please do not hesitate to contact us!

                   

                  * Free Shipping only applies to orders over $49.00, shipping within the contiguous United States.


                  Can't find your part?

                  We can source it for you!

                  We strive to stock it all, however, if you can't find the part(s) you need on our site, let us know, and we will source it for you to be delivered in under a week in most cases.

                  Submit your request here

                  support@kegfactory.com

                  You recently viewed

                  Clear recently viewed