Menu

Ranco Digital Temperature Controller (Two-Stage) - Wired

by Ranco
$179.99 & FREE Shipping. Details
$233.99 Save $54.00 (23%)
List Price: $233.99
You save: $54.00 (23%)

In Stock.
$179.99
& FREE Shipping.
No sales tax. (unless shipping to TX)


Returns are easy, just ask Most items can be returned within 30 days of receipt for a refund. Shipping charges are non-refundable.

Read more | Live chat

Now you can precisely control the temperature of your fermentation, both heating and cooling with this 2 stage temperature controller.


To control ferment temperatures you can place the probe inside the space that is being cooled or heated (often a refrigerator) or you can place the probe directly into the ferment using our Stopper Themowell, FE624. You can set up all your temperature control needs to do cooling and heating mode directly from the digital control panel.  Please look for our video tab to watch an easy to follow guide to programing them.  When in cooling mode, and hooked up to a refrigerator or other cooling device, the controller turns the compressor on when the ambient temperature rises above your set point. When in heating mode and hooked up to our FermWrap (preceeding page) the controller turns on the heater when the temperature drops below your set point. A FermWrap around a fermenter or inside a unplugged refrigerator can be the ideal solution for those cold winter ferments. To control a pump when mashing you would install a thermowell in your mashtun. This can be done in our welding shop or, if you have a coupler in your kettle, you can install our Coupler Thermowell, FE622.

The unit features an adjustable differential down to within one degree in both heating and cooling modes. This means you can precisely control an environment to within one degree of your set point. 

The included sensor probe monitors the temperature while the digital readout displays it in either Fahrenheit or Celsius. The sensor probe is 1/4 in diameter and works well with the Stopper or Coupler Thermowells. Temperature Range of -30 to 220F. 

We also use this digital controller in conjunction with our stainless steel conical fermenters and Brewing Sculptures. With the fermenters it monitors and regulates our electronic cooling units through a thermowell that is permanently installed in the side. With the Brewing Sculptures it can monitor and regulate Mash and Hot Liquor tank temperatures by turning pumps on and off. 


Ranco base Model # ETC-112000-000. 

This controller has two sets of contacts the Normally Open contact is rated at:


115 Volts 208/240 Volts

Full-Load Amps 16 Amps 8 Amps
Locked Rotor Amps 96 Amps 48 Amps
Ressistive Amps 15 Amps 8 Amps
Horsepower 1 hp 1 hp
 

The Normally Closed contact is rated at:

115 Volts 208/240 Volts
Full-Load Amps 5.8 Amps 2.9 Amps
Locked Rotor Amps 34.8 Amps 17.4 Amps
Ressistive Amps 5.8 Amps 2.9 Amps
Horsepower 1/4 hp 1/4 hp

FREE Shipping over $49

Flat Rate $7.95 under $49

Shipping

  • FREE Shipping on all orders over $49 shipping within the contiguous U.S.
  • Most in-stock orders ship the following business day.
  • Standard ground shipping typically takes 1-3 business days in transit

      FedEx / UPS / USPS Shipping:

      • FREE over $49*
      • Flat rate $7.95 under $99
      • 1-3 business days in transit
      • Does not require Signature

      Returns

        We're committed to your total satisfaction. You may return your items within 30 days of their delivery. Please follow the instructions below.  

          Return Eligibility:     

          • Returns must be in brand new condition.     
          • Items must be returned in their original packaging.     
          • Items must include all parts, pieces, and manuals.     
          • Items cannot be assembled or used in anyway. 

          Restocking fees are typically not applied, however, in some cases a restocking fee not to exceed 30% will be withheld from your returned merchandise total.  Shipping costs are non-refundable.

          If you have any further questions, please do not hesitate to contact us!

           

          * Free Shipping only applies to orders over $49.00, shipping within the contiguous United States.

          More Items to Consider

          Product Overview

          Now you can precisely control the temperature of your fermentation, both heating and cooling with this 2 stage temperature controller.


          To control ferment temperatures you can place the probe inside the space that is being cooled or heated (often a refrigerator) or you can place the probe directly into the ferment using our Stopper Themowell, FE624. You can set up all your temperature control needs to do cooling and heating mode directly from the digital control panel.  Please look for our video tab to watch an easy to follow guide to programing them.  When in cooling mode, and hooked up to a refrigerator or other cooling device, the controller turns the compressor on when the ambient temperature rises above your set point. When in heating mode and hooked up to our FermWrap (preceeding page) the controller turns on the heater when the temperature drops below your set point. A FermWrap around a fermenter or inside a unplugged refrigerator can be the ideal solution for those cold winter ferments. To control a pump when mashing you would install a thermowell in your mashtun. This can be done in our welding shop or, if you have a coupler in your kettle, you can install our Coupler Thermowell, FE622.

          The unit features an adjustable differential down to within one degree in both heating and cooling modes. This means you can precisely control an environment to within one degree of your set point. 

          The included sensor probe monitors the temperature while the digital readout displays it in either Fahrenheit or Celsius. The sensor probe is 1/4 in diameter and works well with the Stopper or Coupler Thermowells. Temperature Range of -30 to 220F. 

          We also use this digital controller in conjunction with our stainless steel conical fermenters and Brewing Sculptures. With the fermenters it monitors and regulates our electronic cooling units through a thermowell that is permanently installed in the side. With the Brewing Sculptures it can monitor and regulate Mash and Hot Liquor tank temperatures by turning pumps on and off. 


          Ranco base Model # ETC-112000-000. 

          This controller has two sets of contacts the Normally Open contact is rated at:


          115 Volts 208/240 Volts

          Full-Load Amps 16 Amps 8 Amps
          Locked Rotor Amps 96 Amps 48 Amps
          Ressistive Amps 15 Amps 8 Amps
          Horsepower 1 hp 1 hp
           
          
          The Normally Closed contact is rated at:
          
          115 Volts 208/240 Volts
          Full-Load Amps 5.8 Amps 2.9 Amps
          Locked Rotor Amps 34.8 Amps 17.4 Amps
          Ressistive Amps 5.8 Amps 2.9 Amps
          Horsepower 1/4 hp 1/4 hp

          FREE Shipping over $49

          Flat Rate $7.95 under $49

          Shipping

          • FREE Shipping on all orders over $49 shipping within the contiguous U.S.
          • Most in-stock orders ship the following business day.
          • Standard ground shipping typically takes 1-3 business days in transit

              FedEx / UPS / USPS Shipping:

              • FREE over $49*
              • Flat rate $7.95 under $99
              • 1-3 business days in transit
              • Does not require Signature

              Returns

                We're committed to your total satisfaction. You may return your items within 30 days of their delivery. Please follow the instructions below.  

                  Return Eligibility:     

                  • Returns must be in brand new condition.     
                  • Items must be returned in their original packaging.     
                  • Items must include all parts, pieces, and manuals.     
                  • Items cannot be assembled or used in anyway. 

                  Restocking fees are typically not applied, however, in some cases a restocking fee not to exceed 30% will be withheld from your returned merchandise total.  Shipping costs are non-refundable.

                  If you have any further questions, please do not hesitate to contact us!

                   

                  * Free Shipping only applies to orders over $49.00, shipping within the contiguous United States.


                  Can't find your part?

                  We can source it for you!

                  We strive to stock it all, however, if you can't find the part(s) you need on our site, let us know, and we will source it for you to be delivered in under a week in most cases.

                  Submit your request here

                  support@kegfactory.com

                  You recently viewed

                  Clear recently viewed