Menu

The Ultimate Sparge Arm

$149.99 FREE Shipping. Details
$179.99 Save $30.00 (16%)
List Price: $179.99
You save: $30.00 (16%)

In Stock.
$149.99
& FREE Shipping. Easy Returns.
No sales tax. (unless shipping to TX)

Most items can be returned within 30 days of receipt for a refund. Shipping charges are non-refundable.

Read more | Live chat


Backed by a 1 year
Keg Factory Guarantee

Details »

The perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system!

To use, simply install on your kettle wall, tighten down the red stopper to hold the sparge arm in place, adjust the height of the bottom disc to be right above your grain bed but below the mash tun's water level, and adjust the flow level using the included ball valve. This unit will not include a barb or quick disconnect on the inlet of the ball valve, as every brewery is different. Please choose an inlet attachment from the sparge arms recommended items. Note - This sparge arm will not fit on most coolers. Make sure to check out the video in the video tab below.
 

Features

  • 100% stainless and silicone construction
  • Two adjustment knobs make it extremely universal
  • Included ball valve allows you to increase or decrease the flow rate during sparge or re circulation
  • Included check ball will prevent back flow
  • Can adjust from the top of your kettle to 12-13 inches down into your kettle
  • A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during re circulation
  • Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc.
  • Can be mounted on a lip that is up to 7/8" wide
  • Has a 1/2" FPT ball valve

FREE Shipping over $75

Flat Rate $7.95 under $75

Shipping

  • FREE Shipping on all orders over $75 shipping within the contiguous U.S.
  • Most in-stock orders ship the following business day.
  • Standard ground shipping typically takes 1-3 business days in transit
    • please note: we are experiencing delays in some fulfillment centers due to COVID-19 and wildfires. 

    FedEx / UPS / USPS Shipping:

    • FREE over $75*
    • Flat rate $7.95 under $75
    • 1-3 business days in transit
    • Does not require Signature

    Returns

      We're committed to your total satisfaction. You may return your items within 30 days of their delivery. Please follow the instructions below.  

        Return Eligibility:     

        • Returns must be in brand new condition.     
        • Items must be returned in their original packaging.     
        • Items must include all parts, pieces, and manuals.     
        • Items cannot be assembled or used in anyway. 

        Restocking fees are typically not applied, however, in some cases a restocking fee not to exceed 30% will be withheld from your returned merchandise total.  Shipping costs are non-refundable.

        If you have any further questions, please do not hesitate to contact us!

         

        * Free Shipping only applies to orders over $75.00, shipping within the contiguous United States.

        More Items to Consider

        Product Overview

        The perfect addition to almost any all grain setup! This sparge arm assembly is made completely of stainless steel and silicone, and has two adjustment points. One of these will help to hold the sparge arm against your kettle, while the other allows you to move the sparge arm up or down inside the kettle to accommodate different amounts of grain. These adjustment knobs are very easy to hand tighten and loosen, meaning no tools are necessary. Excellent for sparging as well as recirculating your mash in a RIMS or HERMS system!

        To use, simply install on your kettle wall, tighten down the red stopper to hold the sparge arm in place, adjust the height of the bottom disc to be right above your grain bed but below the mash tun's water level, and adjust the flow level using the included ball valve. This unit will not include a barb or quick disconnect on the inlet of the ball valve, as every brewery is different. Please choose an inlet attachment from the sparge arms recommended items. Note - This sparge arm will not fit on most coolers. Make sure to check out the video in the video tab below.
         

        Features

        • 100% stainless and silicone construction
        • Two adjustment knobs make it extremely universal
        • Included ball valve allows you to increase or decrease the flow rate during sparge or re circulation
        • Included check ball will prevent back flow
        • Can adjust from the top of your kettle to 12-13 inches down into your kettle
        • A single, large diameter outlet port trickles onto a stainless disc, which distributes sparge water gently and evenly. This port is also much easier to flush out and keep clean than many other sparge assemblies with multiple small holes that grain gets stuck in during re circulation
        • Stainless tube measures 18.5" from the top to the bend, and 8.5" from the bottom to the center of the distribution disc.
        • Can be mounted on a lip that is up to 7/8" wide
        • Has a 1/2" FPT ball valve

        FREE Shipping over $75

        Flat Rate $7.95 under $75

        Shipping

        • FREE Shipping on all orders over $75 shipping within the contiguous U.S.
        • Most in-stock orders ship the following business day.
        • Standard ground shipping typically takes 1-3 business days in transit
          • please note: we are experiencing delays in some fulfillment centers due to COVID-19 and wildfires. 

          FedEx / UPS / USPS Shipping:

          • FREE over $75*
          • Flat rate $7.95 under $75
          • 1-3 business days in transit
          • Does not require Signature

          Returns

            We're committed to your total satisfaction. You may return your items within 30 days of their delivery. Please follow the instructions below.  

              Return Eligibility:     

              • Returns must be in brand new condition.     
              • Items must be returned in their original packaging.     
              • Items must include all parts, pieces, and manuals.     
              • Items cannot be assembled or used in anyway. 

              Restocking fees are typically not applied, however, in some cases a restocking fee not to exceed 30% will be withheld from your returned merchandise total.  Shipping costs are non-refundable.

              If you have any further questions, please do not hesitate to contact us!

               

              * Free Shipping only applies to orders over $75.00, shipping within the contiguous United States.


              Can't find your part?

              We can source it for you!

              We strive to stock it all, however, if you can't find the part(s) you need on our site, let us know, and we will source it for you to be delivered in under a week in most cases.

              Submit your request here

              support@kegfactory.com

              You recently viewed

              Clear recently viewed